Chosen Solution
After doing a screen replacement I am missing parts on my logic board, I must have broke them off. I cant seem to understand how to fix it. Everyone says to make a jumper on this resistor near the front camera flex connector using a circuit writer pen, but I don’t know what that it is, or how to do it. Some point at just one resistor, others say make a jumper between one resistor and another. Can someone specify which one, if possible provide a picture and label it and how to do it? I’m extremely desperate at this point. Thank you so much.
Omid Zargham, I am not a friend of placing jumpers and I would not do that. I would replace it properly. As you also pointed out, you are missing L35 all together and will have to replace that to. The other parts that appear to be missing (could of course just be my old people vision) are Reference designator R63 Reference Designator C18 Reference designator FL26. Since you do have the schematic, I do not have to list the values. All those parts should only add up to a few $ and I would replace it properly. If you do not have the tools or the ability to fix it, you could contact user jessabethany on here and see if you can get it soldered that way. Stay away from circuit writer pens unless you know exactly what to do. It can make an utter mess out of your logic board. Hope this helps, good luck.
